This page provides technical specifications only. For applications, selection guidance, and use cases, seeSKF-150L Capless Beveler Overview.
// Technical Data
Capless Pipe & Plate Beveling Machine
Complete Technical Specifications
| Model | Min Pipe OD(mm) | Plate Thickness(mm) | Bevel Width(mm) | Bevel Angles(°) | Motor Power(W) | Rotation Speed(r/min) | Weight(kg) |
|---|---|---|---|---|---|---|---|
| SKF-150L | ≥114 (No Max)mm | 5-25mm | 1-20mm | 30° / 37.5° / 45°° | 2200W | 2000r/min | 35kg |
Showing 1 of 1 models
SKF-150L Capless Beveler Selection Guide: Reading This Datasheet
The SKF-150L is a single-model series because one open-frame design covers what would otherwise take several machines: pipes from 114mm OD with no upper limit, plus flat and curved plate from 5-25mm. The machine rides the workpiece edge on guide rollers instead of encircling it, which is why the diameter column in the table reads "unlimited" — a 300mm pipe and a 4-meter vessel shell are the same job to it.
- Confirm your smallest pipe is at least 114mm OD — below that the guide rollers cannot follow the curvature, and an OD-mounted beveler fits better.
- Bevel angle changes between 30°, 37.5° and 45° are a plate swap, not an adjustment — order the angle sets you weld to.
- At 35kg the machine is two-person portable; site crews should plan lifting for repositioning on vertical seams.
- For plate-only programs above 25mm thickness, move up to the GL or DMM traveling machines.
Drive Options
SKF
Electric
Standard 380V three-phase electric motor