This page provides technical specifications only. For applications, selection guidance, and use cases, seeGL Plate Beveler Series Overview.
// Technical Data
GL Series Automatic Traveling Plate Edge Milling Machine
Complete Technical Specifications
| Model | Clamp Thickness(mm) | Bevel Angle(°) | Power(W) | Weight(kg) |
|---|---|---|---|---|
| GL-860 | 4-80mm | 0-60° | 3400W | 250kg |
| GL-860L | 4-80mm | 0-90° | 3400W | 220kg |
| GL-880 | 4-80mm | 0-90° | 6400W | 310kg |
Showing 3 of 3 models
GL Plate Beveler Series Selection Guide: Reading This Datasheet
Three GL models handle 4-80mm plate: GL-860 (0-60° angle, 250kg), GL-860L (0-90°, 220kg) and GL-880 (0-90°, 6.4kW, 310kg). All are self-propelled edge millers — clamp on the plate edge, set angle and depth, and the machine drives itself along the seam. The series is the compact alternative to the heavier DMM traveling machines for shops that need machined bevels without a 450kg footprint.
- GL-880's 6.4kW spindle is the production pick — nearly double the cutting power of the 860 models for deep bevels in one pass.
- Need angles past 60° (J-preps, steep double bevels)? That rules out the base GL-860; take the 860L or 880.
- At 220-310kg these move by crane or forklift between stations — for machines two workers can carry, look at the SKF-15 handheld.
- For plates beyond 80mm or continuous heavy production, the DMM traveling series is the next step up.
Detailed Specifications by Model
| Parameter | GL-860 | GL-860L | GL-880 |
|---|---|---|---|
| Motor Voltage | AC 440V 60Hz | AC 380V 60Hz | AC 380V 50Hz |
| Total Power | 3400W | 3400W | 6400W |
| Cutting Power | 3000W | 3000W | 2×3000W |
| Feed Power | 400W | 400W | 400W |
| Cutting Speed | 0-1500 r/min (Adjustable) | 0-1500 r/min (Adjustable) | 0-1500 r/min (Adjustable) |
| Max Feed Rate | 10-20mm | 15-20mm | - |
| Min Plate Length | 300mm | 200mm | - |
| Min Plate Width | ≥100mm | ≥100mm | ≥200mm |
| Cutter Blade | 6 pcs | 5 pcs | 8 pcs |
| Surface Finish | Ra 3.2-6.3 | Ra 3.2-6.3 | Ra 3.2-6.3 |
| Bevel Types | K, V, U, Y | K, V, U, Y | K, V, X, Y |
| Single Bevel Width | - | - | 15-20mm (Q235) |
| Max Bevel Width | - | - | 70mm |
Speed Reference by Material
| Material | Plate Thickness | Initial Zone | Speed-Up Zone | Completion Zone |
|---|---|---|---|---|
| Q235 | 3-6mm | 150-250 | 300-800 | 300-500 |
| Q235 | >6mm | 150-250 | 300-800 | 300-800 |
| 45# | 3-6mm | 150-250 | 300-800 | 300-800 |
| 45# | >6mm | 150-250 | 300-700 | 300-700 |
| 16Mn | 3-6mm | 150-250 | 300-800 | 300-500 |
| 16Mn | >6mm | 150-250 | 300-700 | 300-700 |
| Aluminum | 3-8mm | 150-250 | 300-1000 | 300-800 |
| Aluminum | >8mm | 200-300 | 300-1000 | 300-1000 |
| 306 SS | 3-8mm | 150-250 | 300-800 | 300-500 |
| 306 SS | >8mm | 150-250 | 300-800 | 300-800 |
| 316L SS | 3-8mm | 150-250 | 300-800 | 300-500 |
| 316L SS | >8mm | 150-250 | 300-800 | 300-800 |
Speed unit: r/min. Larger bevels require lower speeds.
Drive Options
E
Electric
AC 380V/440V 50/60Hz three-phase motor
P
Pneumatic
Compressed air drive for explosive environments
H
Hydraulic
Hydraulic drive for heavy-duty applications