This page provides technical specifications only. For applications, selection guidance, and use cases, seeISC Block Type Series Overview.
// Technical Data
External Clamping Automatic Beveling Machine - Block Type
Complete Technical Specifications
| Model | OD Range(mm) | Wall Thickness(mm) | Block Sizes(mm) | Bevel Angle(°) | Weight(kg) |
|---|---|---|---|---|---|
| ISC-63C | 25-63mm | ≤12mm | 28,32,38,42,45,51,54,57,60,63mm | 0-45° | 8kg |
| ISC-76C | 25-76mm | ≤12mm | 42,45,51,54,57,60,63,68,76mm | 0-45° | 9kg |
| ISC-89C | 63-89mm | ≤12mm | 63,68,76,83,89mm | 0-45° | 10kg |
| ISC-114C | 76-114mm | ≤12mm | 76,83,89,95,102,108,114mm | 0-45° | 11kg |
Showing 4 of 4 models
ISC Block Type Series Selection Guide: Reading This Datasheet
ISC machines clamp on the pipe outside diameter with a bidirectional block vise — four sizes covering 25-114mm OD, the small-bore range where chucks and clamshells get clumsy. The block clamp grips from two directions at once, so thin small-bore pipe is held square without crushing, and the compact head suits bench or on-pipe use in fabrication of instrument lines, headers and manifolds.
- Ranges step tightly — ISC-63C (25-63mm), ISC-76C (25-76mm), ISC-89C (63-89mm), ISC-114C (76-114mm); buy around the sizes that dominate your work rather than the widest single window.
- Wall capacity is 12mm across the series, ample for small-bore schedule pipe including Sch 160 below 2".
- The ISCP pneumatic variant covers hazardous-area and wet-site work where electric drives are ruled out.
- For quick repetitive clamping on the same small-bore range, compare the cam-lever CAM Type Series — faster per cycle, lighter grip.
Drive Options
ISC
Electric (Metabo)
Standard Metabo electric motor for general applications
ISCP
Pneumatic
Air-powered motor for hazardous environments