This page provides technical specifications only. For applications, selection guidance, and use cases, seeDMM-YG Large Pipe Milling Series Overview.
// Technical Data
Large Pipe Edge Milling Machine
Complete Technical Specifications
| Model | Plate/Wall Thickness(mm) | Bevel Width(mm) | Bevel Angle(°) | Power(W) | Weight(kg) |
|---|---|---|---|---|---|
| DMM-YG-60 | 5-45mm | Max 30mm | 0-60° | 4000W | 310kg |
| DMM-YG-80 | 6-100mm | Max 65mm | 25-70° | 6000W | 330kg |
Showing 2 of 2 models
DMM-YG Large Pipe Milling Series Selection Guide: Reading This Datasheet
The two YG machines bring plate-beveler architecture to very large pipe: they ride the pipe surface and mill the end prep on diameters above 800mm, where no chuck or clamshell frame reaches economically. The DMM-YG-60 machines 5-45mm walls with bevels to 30mm width; the DMM-YG-80 extends to 100mm walls and 65mm bevel width at 25°-70° — penstock, monopile and wind-tower territory.
- Wall thickness decides between the two: YG-60 for walls to 45mm (4kW), YG-80 for the 45-100mm range (6kW).
- Bevel width capacity differs sharply — 30mm versus 65mm — check your WPS prep dimensions on thick-wall joints before assuming the smaller machine.
- Below 800mm diameter, conventional pipe machines are faster to set up: see the Split Frame Series up to 1830mm OD.
- These are crane-positioned machines; plan seam access and machine staging the way you would for a traveling plate beveler, not a portable tool.
Drive Options
DMM
Electric
AC 380V 50Hz three-phase motor